TRACTORS - LOADERS
2003 JD 8420 MFWD tractor, cab, loaded, 3pt w/quick hitch, PTO, Quad. hyd., drawbar, front & rear weights, front fenders, OT712 rear duals (25% rubber), 380/85R34 Front (smooth), 5509 hrs. (pic1) (pic2) (pic3)
1990 JD 4555 Tractor, Cab, Loaded, 3pt w/quick hitch, PTO, trip. hyd, drawbar, front & rear weights, Dual hubs, 18.4R42 rear, 14L-16.1SL 10 ply front, 13422hrs (pic1) (pic2) (pic3) (pic4)
1988 JD 4850 MFWD tractor, cab, loaded, 3pt w/quick hitch, PTO, trip. hyd, drawbar, front & rear weights, 18.4R42 rear duals, 14.9R30 front tires w/fenders, 12097 hrs. (pic1) (pic2) (pic3)
1997 JD TC44H articulating loader, 6' RB bucket w/hyd. grapple, full cab, 17.5R25 tires (smooth), 20,176 hrs. (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (pic7)
2004 New Holland LS170 Super Boom Skid Steer Loader, Turbo Diesel, Full cab, 1352hrs. (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (pic7)
12' JD 544 dozer blade w/under tractor a-frame (pic1) (pic2)
Pr. Long loader bucket forks (pic1)
JD loader bucket, converted to skid steer quick attach (pic1) (pic2)
Auxiliary front mount fuel tank for JD tractor

TRUCKS - TRAILERS
1989 Ford L8000 Diesel feed truck, NEW Allison AT, w/RotoMix 490-14 commercial feed mixer, scales (pic1) (pic2) (pic3) (pic4) (pic5) (pic6)
1989 Peterbilt tandem twin screw day cab semi truck, Cat 3306B dies. eng, 9sp. Eaton Fuller trans, 169,297 miles, nice (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (pic7) (pic8) (pic9) (pic10)
1981 GMC C70 Diesel single axle long wheel base water tanker truck, 5/2sp, Runs but need work, 1500 gal. low pro steel water tank, (pic1) (pic2)
1972 GMC 6500 drag tandem grain truck, V8, 5/2sp, 24' Mabar bed, twin hoist, roll over tarp, 10.00R20 tires, 64k TMU miles, 12v. drill fill auger (pic1) (pic2) (pic3) (pic4)
1979 Chevrolet C70 Custom Deluxe drag tandem grain truck, V8, 5/2sp, 24' Mabar bed, twin hoist, roll over tarp, 10.00R20 tires, 64,473 miles (pic1) (pic2) (pic3)
1978 Chev. C60 Custom Deluxe bobtail grain truck, V8, 5/2sp, 16' Tradewinds bed, hoist, as new 10.00R20 mud & show tires, 1600 gal. poly tank mounted, sides not mounted (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (Grain sides for water truck) (pic1)
1973 Chev C60 bobtail grain truck, steel grain & wood sand sides, V8, 4/2sp, 9.00x20 tires, 60,921 miles (pic1) (pic2) (pic3) (pic4)
'70's Chev 50 feed truck, V8, 5/2sp, BJM Mixer box, not running (pic1) (pic2) (pic3)
'40's Chev grain truck, 13' bed, hoist, 6 cyl, 4sp, not running, tmu (pic1) (pic2) (pic3)

2000 Neville Built 53'x102" ground load tandem axle 5th wheel semi cattle trailer, rubber floor, 2 divider gates, 225/70R22.5 LP tires, (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (pic7) (pic8) (pic9) (pic10) (pic11)
2000 4-Star 24'x6' alum gooseneck tandem stock trailer, full top, good (pic1) (pic2) (pic3) (pic4) (pic5)
Hale/WW style 16' tandem stock trailer, poor (pic1)
Shop built tandem axle steel flatbed trailer (pic1) (pic2)
15' steel bed steerable tongue hay trailer (pic1)
16' steel flatbed single axle shop built trailer (pic1)
5'x10' shop built single axle utility flatbed trailer (pic1)

PICKUPS - UTV
2009 Polaris Ranger XP 700 EFI, mag wheels, Burgundy/red, 9662 mi, 690 hrs. (pic1) (pic2) (pic3) (pic4) (pic5)
2005 GMC 2500 HD reg. cab pickup, V8, AT, loaded, AC, Split bench seat, LWB, running boards, Gooseneck & receiver hitches, Silver, 130471 miles (pic1) (pic2) (pic3) (pic4)
2004 GMC 2500 HD SLE 4x4 pickup, V8, AT, loaded, 8' DewEze 475 hyd. bale bed, hidden GN ball (pic1) (pic2)
2004 GMC 3500 SLE reg. cab flatbed pickup, 8' steel bed, V8, 5sp manual, bucket seats, elec. lock/windows, gooseneck & bumper hitch, 112,642 miles (pic1) (pic2) (pic3) (pic4) (pic5) (pic6) (pic7)
1985 Chevrolet 10 Custom Deluxe 4x4 pickup, reg. cab, LWB, V8, AT, PS, AC, 77383 miles (pic1) (pic2)
1987 Chev. 1500 reg. cab flatbed salvage, rolled, (pic1) (pic2) (pic3)
1965 Chev 20 ¾ ton pickup, 4sp, wood deck flatbed, 86k+ miles, poor condition (pic1) (pic2) (pic3)
'80 Chev. C10 cab & chassis, salvage (pic1)
'90s Chev 4x4 take off pickup bed, - fits silver flatbed (pic1)
Green 90's Chev. 8' take-off pickup bed, 4x4 & fender flares (pic1) (pic2)
Chev take off pickup bed 4x4 1500 green - fits green flatbed (pic1) (pic2)
'80s Chev take off pickup bed, blue (pic1)
New 8' steel flatbed for pickup (pic1)

FARM IMPLEMENTS
2004 JD 567 Mega Wide round baler, PTO, hyd control, net wrap, monitor, needs slip clutch, good (pic1) (pic2) (pic3)
1980 New Holland 315 small square baler, PTO, twine tie, needs slip clutch, good (pic1) (pic2) (pic3) (pic4)
A&L 650T rocking tandem axle grain cart (pic1) (pic2)
JD 7300 MaxEmerge 2 10 rowx30" air planter, seed boxes in shed (pic1) (pic2)
4 JD 9400 hoe drills 12 hoe 10", Hitch & transports (pic1) (pic2)
JD 8200 20 hole disc drill (pic1) (pic2)
Rhino SR15 batwing PTO mower, hyd. (pic1) (pic2)
30' Bushog mod 6401 7x7 3pt bar w/10 row disc furrowers (pic1) (pic2)
35' Sunflower 7x5 sweep plow w/pickers, mod. 3671-35 (pic1) (pic2)
Great Plains Solid Stand 27' 3pt dbl. disc drill, 8" space, markers (pic1) (pic2)
24' Holcomb hyd scrapper/plane (pic1) (pic2)
30' Hamby 3pt dbl. tool carrier w/clod buster packer roller (pic1) (pic2)
30' JD 400 3pt rotary hoe (pic1)
30' Hamby 3pt dbl. tool carrier 9 furrow units & rear diamond bar (pic1) (pic2)
Cliff's Welding tandem axle gooseneck 2 row 10 round bale side dump trailer (pic1) (pic2)
3pt mount gooseneck ball attachment (pic1)
Tandem Axle shop built 5 bale round bale feeder trailer (pic1)
JD 785 rocking tandem Pull type PTO manure spreader, good (pic1) (pic2) (pic3)
New Holland 358 PTO grinder mixer (pic1) (pic2)
30' Hamby dbl. tool carrier w/Blue Jet NH3 coulters & shanks (pic1) (pic2)
2 Hamby 12' culti-packer sections (pic1)
150 gal. green poly tank (pic1)
10' hyd. speed scraper (pic1)
Speed-Co 3pt. posthole digger, 8" auger bit (pic1)
3pt. 2 shank ripper on 8' tool bar (pic1)
7' JD 709 3pt PTO rotary mower (pic1)
21' Loftness 3pt PTO flail shredder (pic1) (pic2)
21' Hamby triple tool carrier w/curved shanks w/hoe points & NH3 setup & manifold (pic1) (pic2)
Case IH 10' 3pt rear blade, hyd. tilt & swivel (pic1) (pic2)
14' Krause HD offset disc, hyd (pic1)
Sunflower 19' trash mulcher mod. 4212-19 (pic1)
Sunflower 32' offset disc, mod. 1232-32 (pic1) (pic2)
Samson small bale retriever wagon, V8, 4sp, large deck (pic1) (pic2) (pic3) (pic4) (pic5) (pic6)
Lowe hyd. 12" post hole digger, skid steer quick mount (pic1)
12" post hole auger (pic1) (pic2)
15' Hamby 4 bar tool carrier w/28 California shanks & frogs
JD 3pt 3 disc boarder maker/ditch closer
54' SpeedKing 8" grain auger, 20hp. elec motor (pic1)
9' 3pt 4 spear bale fork (pic1) (pic2)
2 spear 3pt bale fork (pic1)
11 new packer wheels (pic1)
Pickup bed trailer w/300 gal. fuel tank (pic1)
L-Fuel tank w/12v pump
Small lots of crop chemicals, fertilizer etc.
16 Bags Pioneer (2011) Sorghum Sedan grass seed
Misc. bags corn & sorghum seed

IRRIGATION
31 jts. 10"x30'x30" gated alum pipe (pic1)
10" inline alum butterfly valve
Lots alum irrigation fittings & valves
Pipe trailer (pic1)
Older CAT 6 cyl. nat. gas irrigation eng, unknown condition
6 cyl. Ford eng, salvage
GM 454 V8 Nat. Gas irrig. eng, radiator, clutch, unknown condition
Caterpillar motor starter
Salvage Ford V8 eng. (pic1)

LIVESTOCK EQUIPMENT
1600 gal. low pro poly water tank mounted on '78 Chev. truck (pic1)
Stroberg grey portable head gate (pic1)
3 Stroberg grey portable gate panels (pic1)
40 Stroberg grey 10' & 12' portable corral panels (pic1) (pic2)
Stroberg grey portable loading chute w/carry rack for 10' panels (pic1)
5 unused 20'x7 bar continuous fence panels (pic1)
Shop built wire roller trailer w/25-30 mi. barbed wire, Honda 6 hp gas eng, 4sp trans. (pic1) (pic2)
Cattle medicine & medical equipment
Doz's bags cattle mineral (pic1)
Misc. horse tack
14 steel Praire Products feed bunks (pic1) (pic2)
8 Steel LH feed bunks (pic1) (pic2)
17 misc. steel feed bunks (pic1) (pic2)
3 creep feeder bunks (pic1)
2 Hasting weather vane mineral feeders (pic1)
Lot black PVC feed tubs (pic1)
9 Round water tanks
2 Small ½ round hog huts
½ round calf hut
Spool large cable (pic1)
3 Unused steel pipe pen gates (pic1)
3 New Mira Fount automatic stock waterers (pic1) (pic2)
12 round bale feeders (pic1) (pic2)
Dudley belt drive cross-bed mount wire roller (pic1)
Aluminum Calf Puller
Oster Shear Master elec. livestock clippers
Stewart elec. livestock clippers w/2 heads
Hamms Blowout #111 livestock hair dryer
Pipe saddle rack for 4 saddles
Lots elec. 110v & 12v. fence chargers (pic1) (pic2)
100' wood posts, creosote & hedge (pic1)
24 jts 2 7/8" x30' drill stem tubing (pic1) (pic2)
40 jts 3" x30' drill stem tubing
6 sticks 7/8" x20' sucker rod
4 sticks 12"x20' column pipe
17 - 9'x3" pipe posts
Approx. 1300 ¾" rod elec. fence posts (pic1) (pic2)
Doz's tee posts
3 rolls round baler net wrap
New roll 8.5'x8.5'x66' silage tarp
20 bx 20,000' (2 rolls each) New plastic #140 & #170 baler twine
Lots misc. pipe posts & drill stem pipe
B&S 206cc Banjo 2" water pump (pic1)
White flatbed mount cake feeder (pic1)
Steel 2 compartment coyote dog box for flatbed mount (pic1)
Pet Mate lg dog transport kennel (pic1)

FEED BALES - GRAIN BINS
475 cubic yards 2011 Sorghum Sedan silage, to be removed,
47 round bales 2011 immature milo (pic1) (pic2) (pic3)
192 round bales 2011 sorghum sedan cane (pic1)
33 round bales 2011 alfalfa hay (pic1) (pic2)
30 round bales 2011 wheat straw
113 lg. square bales 2011 corn stocks (pic1) (pic2)
500 small sq. bales 2010 wheat straw bales, stored inside, used for bedding

4 overhead cone bottom feed/mineral bins on free standing pipe frames, to be moved -
3 = 12'x9'x6'high, 5' cone, 1 = 12'x12'x6' high w/6' cone (pic1)
2 Butler cone bottom overhead feed/mineral bins, to be moved, - 8' diameter, 20' tall, 7' cone (pic1)
Butler grain bin to be moved, 17'8" diam., 10' height, on flat floor (pic1)
2 Butler grain bins to be moved, 17' diam, 16' height, on cone pit (pic1)
Brock grain bin to be moved, 16' diam, 22' height, on cone pit (pic1)

SHOP EQUIP. - TOOLS
Lincoln Ranger 250 Portable welder generator, 250 DC/8000 Watt, 808 hrs. (pic1) (pic2)
Lowery Portable elec. diesel fired high pressure steam cleaner (pic1)
Lawson 72 hole bolt bin w/bolts (pic1)
Lawson 40 hole bolt bin w/bolts (pic1)
Napa Homark SE Series 3 section rolling tool cabinet, nice (pic1)
Waterloo 10 drawer top & bottom rolling tool chest
Lincoln AC-225 amp 220v. elec. welder (pic1)
Napa 85-2250 6/12v. 2-225 amp battery charger/booster (pic1)
Pickup mount 100 gal. sprayer, gas eng. (pic1)
½ sack cement mixer, no motor (pic1)
25 gal. ATV 12v. sprayer
MTD Lawn Flite gas eng. lawn edger (pic1)
Simplicity front tine roto-tiller, gas eng (pic1)
Master Mechanic 7 ¼" circular saw
B&D palm sander, 2 vibrating sanders
Nat. gas radiant floor heater (pic1)
Misc. hand tools
24" stand mount shop fan (pic1)
Airgas ox/acet. bottles (Possibly leased, will check w/NAPA in Satanta)
Victor Cutting torch set w/bottle cart (pic1)
Husky Combo battery booster/air compressor/power supply (pic1)
3hp. 220v. metal chop saw, bench mount (pic1)
Olsen metal band saw (pic1)
Master Mechanics 8" bench mount drill press (pic1)
Forney elec. 220v elec. welder
Balco 4" bench vise
6" Post mount shop vise (pic1)
Red Hyd shop press, no jack (pic1)
Dewalt 4" angle grinder
Milwaukee 4" angle grinder
Napa ½" elec. impact
B&D 3/8" elec. drill
2 B&D 3/8" elec. drill
Sioux 7" angle grinder
Weller elec. soldering iron
Ridgid pipe threader & pipe cutter
Chicago Elec. bench top parts washer
Metal welding/cutting table (pic1)
Yale 4 ton hyd floor jack (pic1)
3 ton hyd. floor jack
12 ton bottle jack
Lots misc. tools/sockets sets/wrenches
Pick, ensilage fork, Posthole digger, shovels
2 sledge hammers
4 air bubbles (pic1)
100# LP bottle used as air bubble (pic1)
½" Elec. HD drill w/bench mount press (pic1)
Remington 110v. elec. chain saw (pic1)
Craftsman bench grinder (pic1)
8sp. Bench mount drill press (pic1)
Craftsman 3 ton hyd. floor jack (pic1)
Furniture clamps, level, hand saws (pic1) (pic2)
Quartz shop light (pic1)
Welding rod
18' Alum step ladder
1000 gal. diesel tank on skids (mounted on overhead stand) (pic1)
500 gal. gas tank on skids (mounted on overhead stand) (pic1)
2 Palmer 232 stackable 232 gal. oil tanks, 1-drip oil ½ full, 1-gear oil under ¼ full (pic1)
500 gal. LP tank - 35% full (pic1)
120 gal. LP tank - 85% full (pic1)
L-pickup bed fuel tank w/12v. pump
Lots buckets & barrels oils & lubricants
Lot oil & air filters
4 Stampede Radial AT/S Tires, LT225/75R16 on 6 bolt white spoke wheels, used very little
Lots misc. tires & wheels, pickup/truck/implement/sprinkler/tractor
Antique combine header tail weight (pic1)
Misc. service & Chilton automotive manuals
2 steel cross bed tool box
Sharp microwave oven (pic1)
2 Storage refrigerators (pic1)
3 folding metal chairs

Dozen's of other items too numerous to list

TERMS: CASH - Check w/ positive ID - NO BUYERS PREMIUM.
Bidders are advised to personally determine condition of items prior to bidding.
All merchandise is sold in it's present condition with NO warranties.
No warranties expressed or implied. - Announcements day of sale take precedence.
All merchandises must be removed within 14 days, unless other wise noted - LUNCH SERVED.